One thing that must exist in your kitchen is the dishwasher. That’s where you will wash your dishes. Everyday you are going to use it, then do not be surprised if your dishwasher is damaged and you must replace it. You maybe always ask for help builders to do it. Yet actually you can do it yourself. By knowing how to install dishwasher, your problem of dishwasher installation is resolved.
There are some ways how to install dishwasher that you should know. First, start by attaching the drain line. Take the new dishwasher out of the box and lay it face down so the back is visible. Verify that all of the connections are there. Take the cap off the drain line connection at the dishwasher. Then, attach the drain line to the dishwasher. Second, thread the drain line.
Use pliers and crimp the clamp around the hose to secure. Next you can thread the drain line into the hole under the sink. It’s continued by sliding the dishwasher under the countertop. Level the countertop by adjusting the height of the legs with a wrench. Secure the dishwasher to the countertop with screws.
After that, re-attach the wires of the same color, then screw on wire nuts and wrap with electrical tape. Place the copper ground wire under the green-round screw, and then tighten down. You should verify that the power is still off at the breaker. The next step is by attaching the supply line and the dishwasher.
Then, tighten with a wrench. When all is done you can turn on the water and the power. You can turn on the water under the sink.Last, attach the drain line to the plumbing system. Tighten the clamp around the hose. Turn the power on at the breaker. Your dishwasher is installed. They are the steps how to install dishwasher. Know them well and do when you need to change your dishwasher.